Set of 4 DIEWE Brenta wheels for Tesla Model Y

DIEWE Brenta Wheels for Tesla Model Y — five dynamic double spokes

The DIEWE Brenta are made by DIEWE Wheels, the German wheel specialist, from cast aluminium. Their five double spokes, with a hollowed profile, give the Model Y a sporty, refined look. This set of 4 wheels is available in 20 and 21 inches, in 1 finish, for all generations of the Model Y, including the Juniper 2025+.

Compatibility of DIEWE Brenta wheels with the Tesla Model Y

Model Y 2025+ Juniper

Model Y 2021-2024

Versions covered

Rear-Wheel DriveLong Range Rear-Wheel DriveLong RangePerformanceStandard Rear-Wheel Drive 2025+

Why choose DIEWE Brenta wheels for your Tesla Model Y?

• DIEWE brand: cast aluminium wheels, distributed by DIEWE Wheels
• Mounting kit included: the bolts suited to the Model Y are supplied with the set
• Finish: Gloss Black
• Tesla Model Y approved sizes: 9.5 x 20 ET45 and front 9.5 x 21 ET40 / rear 10.5 x 21 ET48, bolt pattern 5 × 114.3
• Sold as a set of 4, each wheel individually packed and protected

Cast aluminium construction

DIEWE Brenta wheels are made from cast aluminium: the molten metal is injected into a mould, then the wheel is machined and painted. It is the most widespread process, and the one that offers the best balance between strength and price for everyday use.

Every size offered on this page has been validated for the Tesla Model Y by the manufacturer: width, offset and load rating are matched to the SUV's weight and running gear.

21 inches: a front / rear staggered setup, just like the factory fitment

In 21 inches, the set follows the principle of the Model Y's factory fitment: 2 front wheels 9.5 x 21 ET40 and 2 rear wheels 10.5 x 21 ET48, which are wider. The front and rear wheels must not be swapped when fitting. This set suits all versions of the Model Y.

Certification and compliance

In the 9.5 x 20 ET45 size, DIEWE Brenta wheels have ABE approval (Allgemeine Betriebserlaubnis) issued in Germany for the Tesla Model Y. For the front 9.5 x 21 ET40 / rear 10.5 x 21 ET48 combination, the fitment is validated by the manufacturer for the Model Y. The document for your size is sent to you with your order.

Fitting: what to plan for

The mounting kit is included: the bolts suited to the Tesla Model Y are supplied with the set, so there is nothing extra to order. Allow 30 to 45 minutes for all four wheels with a jack and a torque wrench. Follow the tightening torque specified in your vehicle's manual and retighten the fasteners after the first few kilometres.

Tyre fitting should be entrusted to a workshop equipped with a suitable machine, with a balance check after fitting. Keep the approval report in the vehicle if your country's regulations require it.

Add tyres to your order

Choose your tyres via the links below. If you would like us to handle the fitting, select the “Fitting on purchased wheels” option and tick “Yes”: we assemble and balance the wheels at our partner workshop before shipping.

Swiss approval certificate and delivery

Swiss customers: a specific approval certificate can be issued. Add the “Swiss Approval Certificate” product to your basket when ordering your wheels, then send us the requested information. Once the file is complete, the certificate is sent by post within approximately 5 working days.

LINK TO SWISS CERTIFICATE

Each wheel is individually packed, protected on both sides and fully wrapped in film. This product is shipped separately from the rest of your order.

Frequently asked questions

How are DIEWE Brenta wheels made?

They are made by DIEWE Wheels, the German wheel specialist, from cast aluminium. Every size offered has been validated for the Tesla Model Y.

Which size for the Model Y Standard Rear-Wheel Drive 2025+?

This version leaves the factory on 18-inch wheels (235/55 R18 tyres). The DIEWE Brenta are fitted in 20 and 21 inches: this is an upsize fitment, with tyres of the corresponding size.

Are the DIEWE Brenta suitable for the Model Y Juniper 2025+?

Yes. The sizes offered on this page (9.5 x 20 ET45 and front 9.5 x 21 ET40 / rear 10.5 x 21 ET48) cover both the Model Y 2021-2024 and the Model Y Juniper 2025+, including the Performance.

Are specific nuts or spacers needed?

The mounting kit suited to the Model Y is included in the set. No spacers are needed for the sizes listed on this page.

Are tyres and pressure sensors included?

No, this set includes the 4 wheels and their mounting kit. Tyres are ordered separately via the links above, with the option of fitting and balancing at our partner workshop.