Windshield wipers for Tesla Model 3

The wipers that come with the original Tesla are often of average quality and have a limited lifespan before they begin to wipe poorly.

GreenDrive therefore proposes that you, when you make a change or simply to improve your visibility, to switch to the range specially tested and approved by usto take advantage of new quality and durable wipers.

This model, specially designed for the Tesla Model 3, allows perfect compatibility and increased efficiency.

For your information, Tesla recommends one change per year for maximum efficiency.

Simple installation to replace the windshield wiper blades :

- Switch to mode P (parking)

- Press "Controls", then "Maintenance" and finally activate the "Wiper Service Mode".

- Lift the wiper slightly, just enough to gain access to the blade.

- Attention: the wiper blades do not lock in the raised position. Do not raise the wiper beyond the intended position.

- Place a cloth under the wiper arm to avoid scratching or cracking the windshield if the arm suddenly folds down.

- Hold the wiper arm and press the locking tab while sliding the blade along the arm.

- Align the new blade on the wiper arm and slide it towards the hooked end on the arm until it snaps into place.

- Carefully replace the wipers against the windshield.

- Turn off the Wiper Care Mode to return the wipers to the normal position.

Material : plastic and iron

Quantity : set of two Tesla Model 3 front windshield brushes

Brand : GreenDrive

We can assist you if you have difficulties with assembly!

Be careful to remove the plastic part that serves as protection before installation.

Here is a picture below