Set of 4 Japan Racing JR48 wheels for Tesla Model 3

Japan Racing JR48 Wheels for Tesla Model 3 — a design with four different finishes

The JR48 features a structured design with clean, even branches, available in four finishes — the widest selection in the series. Available in 19 and 20 inches for all generations of Tesla Model 3, with a front/rear kit for the Performance Highland 2024+ in 20-inch.

Compatibility of Japan Racing JR48 rims with the Tesla Model 3

Model 3 2024+ Highland

Model 3 2018–2023

Variants Covered

PropulsionLong Range PropulsionLong Battery LifePremiumPerformance 2018–2023Performance 2024+ · 20 inches

Why Choose Japan Racing JR48 Rims for Your Tesla Model 3 ? ?

• Proven Manufacturing : cast aluminum tested in accordance with Japanese JWL/VIA standards
• Four finishes : gray, charcoal gray, glossy black, and bronze
• Structured Drawing : clean-cut spokes that look just as good on light-colored as on dark-colored car bodies
• Screws and centering rings included : Everything is included in the set, including the original nuts Tesla are not suitable for this part number
• Wheelbase 5 × 114.3, with dimensions approved for Tesla Model 3
• Sold in sets of 4, each wheel individually packaged and protected

Made of cast aluminum

Japan Racing JR48 rims for Tesla Model 3 are produced in cast aluminum. The alloy is poured into a mold and then machined: this is the most proven process on the market, one that makes it possible to offer intricate designs at an affordable price, with strength perfectly calibrated for everyday road use.

Each item is inspected in accordance with the JWL and VIA standards, which govern the structural strength of alloy wheels in Japan and serve as a benchmark for exports.

Model 3 Performance 2024+: a front/rear kit

The Model 3 Performance Highland comes from the factory with rear rims that are wider than the front ones. The JR48 follows this configuration: the set no longer consists of four identical rims but of two front rims and two rear rims, with the separate offsets shown in the table above. This configuration is available only in 20 inches : the Performance Highland The 2024+ model cannot be equipped with 19-inch wheels for this part number.

Keep this in mind when ordering your tires: the front and rear sizes are also different. On the Model 3 Powertrain, Long Range, and Premium, as well as on the Performance 2018–2023: The wheel setup remains the same, with four identical rims.

Certifications and Compliance

These rims are certified JWL and VIA, which guarantee the rim's structural strength in accordance with Japanese standards and serve as a reference for export. No TÜV report is available for the JR48 as of now.

Installation: What to Expect

The set comes with its special fasteners and their centering rings. The original nuts Tesla are not compatible with this model—you must use the ones provided. Allow 30 to 45 minutes for all four wheels using a jack and a torque wrench. Follow the torque specifications listed in your vehicle’s manual and retighten the fasteners after driving the first few kilometers.

Tire installation should be performed by a repair shop equipped with the appropriate machinery, including a balance check after installation. Keep the certification report in the vehicle if required by your country's regulations.

Add tires to your order

Choose your tires using the links below. If you'd like us to install them, select the option "Installation on purchased rims" and check the box "Yes" : We assemble and balance the wheels at our partner workshop before shipping.

Swiss Type Approval Certificate and Delivery

Swiss customers : A specific certification can be issued. Add the "Swiss Certification" product to your cart when ordering your rims, then provide us with the requested information. Once the application is complete, the certificate is Shipped by mail within approximately 5 business days.

LINK TO SWISS CERTIFICATE

Each wheel rim is individually packaged, protected on both sides, and fully wrapped in plastic. This product is shipped separately from the rest of your order.

Frequently Asked Questions

How are these rims made ?

They are made from cast aluminum: the alloy is poured into a mold and then machined. This is the most common process, offering the best value for the money, with a level of durability perfectly suited for everyday road use.

Are the JR48s suitable for a Model 3 Performance ? ?

Yes. At the Performance 2018–2023 with four identical rims, and at the Performance Highland 2024+ front/rear kit available in 20-inch size only. Be sure to check your model when selecting your configuration: the two configurations are not interchangeable.

Do we need specific nuts, washers, or spacers ?

The original nuts Tesla are not compatible with this part number: the appropriate fasteners are included in the kit, along with the centering rings which ensure proper centering on the hub. However, no spacers are required for the approved dimensions listed on this sheet.

Are the tires and pressure sensors included ?

No, this set includes only the 4 rims. Tires must be ordered separately using the links above, with the option to have them mounted and balanced at our partner shop.