Winter Complete Wheels for Tesla Model 3 2024+ Highland PERFORMANCE - BK43 20" Rims with Tyres (Set of 4) (TUV)

BK43 20-inch Rims with Winter Tyres Fitted for Tesla Model 3 Highland Performance (Set of 4)

The BK43 20-inch winter complete wheels are reserved for the Model 3 2024+ Highland Performance. They keep the Performance’s staggered front / rear fitment: 9 × 20 ET34 at the front and 10 × 20 ET45 at the rear, fitted with 235/35 R20 and 275/30 R20 tyres, the factory tyre sizes. All four wheels arrive mounted, balanced and ready to fit, with four Bluetooth sensors programmed for the Highland. Their fine-spoke design is offered in two finishes: matte anthracite grey or gloss black.

Compatibility of the BK43 20-inch winter complete wheels for Model 3

Model 3 2024+ Highland Performance only

Variant covered

Performance 2024+ HighlandNot compatible with Rear-Wheel DriveNot compatible with Long RangeNot compatible with Model 3 2019-2023

Why choose BK43 20-inch rims for your Model 3 Performance?

• The factory tyre sizes: winter tyres in 235/35 R20 at the front and 275/30 R20 at the rear, like the Performance in summer
• Dual ECE and ABE approval: European and German certificates available to download, useful for roadworthiness inspections or for your insurer
• Ready to fit: winter tyres mounted and balanced in our workshop, no trip to a tyre fitter
• Bluetooth sensors included: set of 4 sensors installed and programmed for the Highland, so the pressure alert stays active all winter
• Direct hub centring: 64.2 mm centre bore, no centring rings, original Tesla nuts retained
• Two finishes: matte anthracite grey or gloss black, on a set of 4 rims

A reference dedicated to the Model 3 Highland Performance

This set is for one version only: the Model 3 2024+ Highland Performance, for which the ECE and ABE certificates of these rims were issued. The Model 3 Highland Rear-Wheel Drive and Long Range, as well as all 2019 to 2023 Model 3s, are not covered: for these versions, see our 20-inch winter complete wheel sets for Model 3, with four identical wheels. If you prefer a taller sidewall, the same rim is available in 19 inches for the Performance: BK43 19-inch winter complete wheels for Model 3 Highland Performance.

Fitting: what to expect

This set is fitted with different sizes front / rear: the wheels cannot be swapped from one axle to the other, so note their position carefully when fitting and when storing them. The original Tesla nuts can be reused and no centring rings are needed. Allow 30 to 45 minutes for all four wheels with a jack and a torque wrench. Follow the tightening torque specified by Tesla in your vehicle’s manual and re-check the fixings after the first few miles.

Choosing your winter tyres: how does it work?

The tyre choice is made directly on this page, via the “Complete with” option. All the tyre sets offered are winter tyres in 235/35 R20 at the front and 275/30 R20 at the rear, bearing the 3PMSF mountain marking. The details of each set — load and speed ratings, EU label — appear on its own product page. The tyres offered depend on the stock available when you order.

Snow chains: the front rim certificate prohibits their use; at the rear, only fine-link chains no more than 10 mm thick, fastener included, are permitted. Also follow the recommendations in the Tesla manual.

Once the tyres are selected, we mount them on the rims, balance all four wheels and install the sensors, then ship the set ready to fit, separately from the rest of your order.

ECE and ABE certificates and Swiss approval

The BK43 20-inch rims have a European ECE approval and a German ABE approval (KBA no. 54587 for the 9 × 20 front rim, no. 55659 for the 10 × 20 rear rim), issued for the Tesla Model 3 Highland Performance. All four documents can be downloaded directly from this page: present the one your roadworthiness inspection or your insurer requires.

Download the ECE certificate for the 9 × 20 front rim

Download the ECE certificate for the 10 × 20 rear rim

Download the ABE certificate for the 9 × 20 front rim

Download the ABE certificate for the 10 × 20 rear rim

Swiss customers: a specific approval certificate can be issued. Add the “Swiss approval certificate” product to your basket when ordering your set, then send us the information requested. Once the file is complete, the certificate is sent by post within approximately 5 working days. It is sent separately from the rest of the order, so its lead time does not delay the delivery of your wheels.

Order the Swiss approval certificate