G7 Ultra Tar Remover - Alchimy 7

G7 ULTRA Alchimy7 is a powerful cleaner to remove tar, glue, oil, grease and resin residues.

It can be used after pre-washing the vehicle or after washing. Its formulation allows a fast action but requires a longer application to remove deeper residues such as old wheel balancing weights.

Shake bottle before use.

Use after pre-washing or after washing (and ideally before mechanical decontamination with H7 or F7 Gum):

1. Spray on areas to be treated and allow to work.

2. Remove residues with a clean microfiber. If necessary, rub delicately with a Brush A7 - UHR (example: for the interiors of the rims).

3. Ideally, rinse treated areas.

NOTE: Do not let dry. Always work on cold or cooled surface.

Use on dry surfaces ensures better performance. It is also possible to spray directly on a microfiber to treat very small areas.

Rinsing is not required, especially when treating small areas. In this case, wipe with a wet microfiber and then do a finishing wipe with a clean, dry microfiber.