Tesla Model Y 2025+ Juniper Premium to Model Y 2025+ Body Conversion Kit Performance

Body Conversion Kit Performance for Tesla Model Y Juniper 2025+ — The Look Performance on your Model Y Premium

This complete kit transforms the look of your Tesla Model Y Juniper 2025+ Premium by following the contours of the trim Performance : redesigned front bumper, lower skirt and splitter, side air intakes, side skirt extensions, and rear diffuser. All parts are molded from polypropylene (PP), the same material as the original body parts Tesla, and are mounted on the original mounting points. Parts delivered with a primer finish should be painted to match your vehicle's color; textured black and glossy black parts are delivered fully finished.

Compatibility of the kit with the Tesla Model Y

Model Y 2025+ Juniper — compatible

Model Y 2021–2024 — not compatible

Versions Covered

Model Y Juniper 2025+ PropulsionModel Y Juniper 2025+ Long-Range PropulsionModel Y Juniper 2025+ Long-LifeModel Y Standard Propulsion 2025+ — not compatible

What's Included in the Kit

Why Choose This Conversion Kit Performance ? ?

• Polypropylene (PP) : the same material as the original body parts Tesla — identical flexibility, impact resistance, and cold resistance; identical paintability
• Complete front, side, and rear kit : No additional parts are needed to achieve the desired look Performance throughout the vehicle
• Original mounting points : The layout follows the same layout as before Tesla, without drilling into the body or cutting it
• Brackets, reinforcements, and fasteners included : The kit contains the rails and clips needed to remove and reinstall the bumper
• Black components delivered fully finished : Only the front bumper and the side trim pieces need to be repainted

The same material as the original: polypropylene

The bumpers and front and rear bumpers of the Tesla Model Y are molded from polypropylene (PP), a thermoplastic chosen for its ability to withstand a light impact without cracking and then return to its original shape. This kit is manufactured in the same material, with wall thicknesses and reinforcing ribs modeled after the original parts.

The direct consequence for you is that the part warps and settles like a coin Tesla, it ages in the same way when exposed to temperature fluctuations, and it can withstand the same painting procedures as with the original bodywork—plastic primer, tinted base coat, clear coat. A body shop doesn't have to make any adjustments compared to a manufacturer's part.

Painting: What You Need to Plan For

The front bumper and the side covers are delivered with a gray primer finish. They must be painted in the exact color of your vehicle before installation: note the color code Tesla on the identification label on the driver's side door frame and give it to your body shop. Polypropylene requires a primer for plastic before applying the base coat and top coat.

The other components—lower bumper, glossy black splitter, air intakes, air deflectors, side skirts, and rear diffuser—are delivered ready-to-use and require no preparation. We recommend having the parts painted before the installation appointment, so that the vehicle is off the road only once.

Installation: What to Expect

The installation follows the original mounting points : No drilling or cutting of the body is required. However, the procedure does require the Complete removal of the front bumper, followed by the transfer of the equipment currently on your vehicle—front camera, radar sensors, sensor arrays, lights, and mounts—to the new bumper. This work should be performed by a body shop or a well-equipped workshop; expect it to take half a day to a full day depending on the workshop, in addition to the painting time.

After installation, check the clearances and alignment along all the seam lines, then verify that the driver-assistance features that rely on the front fascia are functioning properly. Carefully reinstall the original clips, supplemented by those provided in the kit, to prevent rattling noises during use.

Regulations and Compliance

This kit replicates body parts without altering the vehicle’s overall dimensions, structure, or safety features. Depending on your country of registration, however, a cosmetic modification to the body may still need to be reported. Check with your vehicle registration authority and your insurance provider before installation : The rules vary from country to country within the European Union and in Switzerland.

Shipping and Packaging

Each item is individually protected and secured in its packaging. Due to its size, This kit is shipped separately from the rest of your order and delivered by a specialized carrier. Check the condition of the package in the presence of the driver and note any reservations on the delivery receipt.

Frequently Asked Questions

Is this kit suitable for my Model Y ? ?

It is designed for the Tesla Model Y Juniper 2025 and later in the Premium trim level—Rear-Wheel Drive, Long Range Rear-Wheel Drive, and Long Range. It is not compatible with the Model Y 2021–2024, which have a different front panel and mounting hardware, nor with the Model Y Standard Propulsion 2025+.

Are the pieces painted ?

Partially. The front bumper and side trim pieces are delivered in gray primer and are meant to be painted to match your vehicle's color. The textured black and gloss black components—lower bumper, splitter, air intakes, deflectors, side skirts, and rear diffuser—are delivered pre-finished.

Is polypropylene as strong as the original part ?

This is the the same material than the one used by Tesla for its bumpers. PP absorbs a light impact by deforming and then springing back into shape; it is cold-resistant and compatible with standard automotive painting processes, including plastic primer.

Do you need to drill holes in the body ?

No. The installation uses the vehicle's original mounting points, along with the screws, clips, and fasteners included in the kit. However, removing the front bumper and relocating the sensors requires the assistance of a professional.

Are sensors, radar, and cameras included ?

No. The mounting locations are pre-marked in the vehicle, but your vehicle's electronic components are retained and transferred during installation. No sensors, radar units, cameras, or wiring harnesses are included with the kit.

Is installation included ?

No, the kit is sold separately. Plan on spending half a day to a full day at a body shop, in addition to the time needed to paint the parts that come primed.