Set of 4 Antera A101 wheels for Tesla Model 3

Antera A101 Wheels for Tesla Model 3 — five wide Y-spokes

The Antera A101 are made by Antera from low-pressure cast aluminium. Their five wide spokes, which split into a Y towards the rim edge, give the Model 3 a clean, powerful look. This set of 4 wheels is available in 20 inches, in 4 finishes, for the Tesla Model 3 2018-2023 and the Model 3 Highland 2024+ (excluding Performance).

Compatibility of Antera A101 wheels with the Tesla Model 3

Model 3 2024+ Highland

Model 3 2018-2023

Versions covered

Rear-Wheel DriveLong Range Rear-Wheel DriveLong RangePremiumPerformance 2018-2023Not compatible with Performance 2024+

Why choose Antera A101 wheels for your Tesla Model 3?

• Antera brand: cast aluminium wheels, distributed by DIEWE Wheels
• Mounting kit included: the bolts suited to the Model 3 are supplied with the set
• Finishes: Gloss Black, Bronze, Black polished face and Matte anthracite grey polished face
• Tesla Model 3 approved sizes: 9 x 20 ET34, bolt pattern 5 × 114.3
• Sold as a set of 4, each wheel individually packed and protected

Cast aluminium construction

Antera A101 wheels are made from cast aluminium: the molten metal is injected into a mould, then the wheel is machined and painted. It is the most widespread process, and the one that offers the best balance between strength and price for everyday use.

Every size offered on this page has been validated for the Tesla Model 3 by the manufacturer: width, offset and load rating are matched to the car's weight and running gear.

Model 3 Performance 2024+: not compatible

The Model 3 Performance Highland requires a staggered setup, with wider wheels at the rear than at the front. The Antera A101 only come as 4 identical wheels, so they are not offered for this version. The Model 3 Performance 2018-2023 remains compatible.

Certification and compliance

The Antera A101 wheel sizes offered on this page are validated by the manufacturer for the Tesla Model 3. The approval document for your size is sent to you with your order.

Fitting: what to plan for

The mounting kit is included: the bolts suited to the Tesla Model 3 are supplied with the set, so there is nothing extra to order. Allow 30 to 45 minutes for all four wheels with a jack and a torque wrench. Follow the tightening torque specified in your vehicle's manual and retighten the fasteners after the first few kilometres.

Tyre fitting should be entrusted to a workshop equipped with a suitable machine, with a balance check after fitting. Keep the approval report in the vehicle if your country's regulations require it.

Add tyres to your order

Choose your tyres via the links below. If you would like us to handle the fitting, select the “Fitting on purchased wheels” option and tick “Yes”: we assemble and balance the wheels at our partner workshop before shipping.

Swiss approval certificate and delivery

Swiss customers: a specific approval certificate can be issued. Add the “Swiss Approval Certificate” product to your basket when ordering your wheels, then send us the requested information. Once the file is complete, the certificate is sent by post within approximately 5 working days.

LINK TO SWISS CERTIFICATE

Each wheel is individually packed, protected on both sides and fully wrapped in film. This product is shipped separately from the rest of your order.

Frequently asked questions

How are Antera A101 wheels made?

They are made by Antera from low-pressure cast aluminium. Every size offered has been validated for the Tesla Model 3.

Are the Antera A101 compatible with the Model 3 Highland?

Yes, in 20 inches, on the Rear-Wheel Drive, Long Range and Premium versions. The Model 3 Performance 2024+ is not compatible, as it requires wider rear wheels.

Are specific nuts or spacers needed?

The mounting kit suited to the Model 3 is included in the set. No spacers are needed for the sizes listed on this page.

Are tyres and pressure sensors included?

No, this set includes the 4 wheels and their mounting kit. Tyres are ordered separately via the links above, with the option of fitting and balancing at our partner workshop.