Set of 4 Antera A105 wheels for Tesla Model 3

Antera A105 Wheels for Tesla Model 3 — an openwork web of spokes

The Antera A105 are made by Antera from low-pressure cast aluminium. Their spokes branch out into an open geometric web, an intricate design that catches the light across the whole face of the wheel. This set of 4 wheels is available in 20 inches, in 4 finishes, for the Tesla Model 3 2018-2023.

Compatibility of Antera A105 wheels with the Tesla Model 3

Model 3 2018-2023

Versions covered

Rear-Wheel DriveLong Range Rear-Wheel DriveLong RangePerformance 2018-2023Not compatible with Model 3 2024+ Highland

Why choose Antera A105 wheels for your Tesla Model 3?

• Antera brand: cast aluminium wheels, distributed by DIEWE Wheels
• Mounting kit included: the bolts suited to the Model 3 are supplied with the set
• Finishes: Bronze, Black polished face, Matte anthracite grey polished face and Black and gold
• Tesla Model 3 approved sizes: 8.5 x 20 ET35, bolt pattern 5 × 114.3
• Sold as a set of 4, each wheel individually packed and protected

Cast aluminium construction

Antera A105 wheels are made from cast aluminium: the molten metal is injected into a mould, then the wheel is machined and painted. It is the most widespread process, and the one that offers the best balance between strength and price for everyday use.

Every size offered on this page has been validated for the Tesla Model 3 by the manufacturer: width, offset and load rating are matched to the car's weight and running gear.

Model 3 Performance 2024+: not compatible

The Model 3 Performance Highland requires a staggered setup, with wider wheels at the rear than at the front. The Antera A105 only come as 4 identical wheels, so they are not offered for this version. The Model 3 Performance 2018-2023 remains compatible.

Certification and compliance

Antera A105 wheels have ABE approval (Allgemeine Betriebserlaubnis) issued in Germany for the Tesla Model 3, for every size offered. The document for your size is sent to you with your order.

Fitting: what to plan for

The mounting kit is included: the bolts suited to the Tesla Model 3 are supplied with the set, so there is nothing extra to order. Allow 30 to 45 minutes for all four wheels with a jack and a torque wrench. Follow the tightening torque specified in your vehicle's manual and retighten the fasteners after the first few kilometres.

Tyre fitting should be entrusted to a workshop equipped with a suitable machine, with a balance check after fitting. Keep the approval report in the vehicle if your country's regulations require it.

Add tyres to your order

Choose your tyres via the links below. If you would like us to handle the fitting, select the “Fitting on purchased wheels” option and tick “Yes”: we assemble and balance the wheels at our partner workshop before shipping.

Swiss approval certificate and delivery

Swiss customers: a specific approval certificate can be issued. Add the “Swiss Approval Certificate” product to your basket when ordering your wheels, then send us the requested information. Once the file is complete, the certificate is sent by post within approximately 5 working days.

LINK TO SWISS CERTIFICATE

Each wheel is individually packed, protected on both sides and fully wrapped in film. This product is shipped separately from the rest of your order.

Frequently asked questions

How are Antera A105 wheels made?

They are made by Antera from low-pressure cast aluminium. Every size offered has been validated for the Tesla Model 3.

Are the Antera A105 compatible with the Model 3 Highland?

No. The approved sizes for this wheel only cover the Model 3 2018-2023, Performance included.

Are specific nuts or spacers needed?

The mounting kit suited to the Model 3 is included in the set. No spacers are needed for the sizes listed on this page.

Are tyres and pressure sensors included?

No, this set includes the 4 wheels and their mounting kit. Tyres are ordered separately via the links above, with the option of fitting and balancing at our partner workshop.